Terrain awareness (TAWS)

See rising terrain ahead

The TAWS view is a map of the terrain around you, turned to your track, with range rings. The ground is coloured against the altitude named at the top of the view: red where it comes within 100 ft of that altitude or rises above it, yellow within 1000 ft, and left uncoloured below that.

  • Within 100 ft of the altitude at the top, or higher than it
  • Within 1000 ft below it
  • More than 1000 ft below it — the map shows through
Terrain awareness (TAWS) in Air Navigation - VFR & IFR

On the ground: a preview

Standing on the field, all the ground around you is within 100 ft of you, and the view would be red from edge to edge. So on the ground it shows a preview instead — marked Preview at the top — with the terrain coloured against 1000 ft above the field. What is red then is what stands in the way of the departure.

− and + beside it change the preview altitude in 500 ft steps, and the choice is kept for the next flight.

In the air: your GPS altitude

Past 40 kt, or 150 ft above the ground, the view changes over to your GPS altitude — marked GPS altitude, the figure on the altitude tape — and goes back to the preview once you have landed.

Near an aerodrome and below 500 ft above it, the flat ground around the field is shown yellow rather than red: just after take-off and on final you are close to the ground by design. Ground higher than the field stays red.

Tip — The altitude is the GPS altitude, not your altimeter reading, and the two can differ by a few hundred feet.

The terrain comes from the data of a downloaded region, so the view keeps working with no connection.

FlyGo Pro — The TAWS view is part of FlyGo Pro.
Note — Terrain data is advisory only and must never be used as a primary means of terrain avoidance.

← The flight HUD · All topics · Traffic (ADS-B) →

Download Air Navigation - VFR & IFR on the App Store